Top 15 Backup Camera Mounts And Brackets

If you own a car, you may know about the backup camera. It can reduce your blind spots and make your driving more enjoyable. In May of 2018, the National Highway Traffic Safety Administration announced that it would require all vehicles sold in the United States to include backup cameras. So it has become a standard feature on vehicles. When it comes to backup cameras, there are two common question that most people have: where to mount backup camera and how do I install them into my car? Most people think that is extremely difficult to install backup cameras. However, there are many backup camera mounts and brackets on the market that can be a helper to this problem. With these outstanding camera mounting accessories, independent installation becomes possible and easy. If you want to replace your old backup camera or add a new one and plan to install it yourself, reading this article is worthwhile. We will introduce the top 15 backup camera mounts and brackets to make your accessory search easier.

Content Table:

Monitor Mounts:

• 1. Swivel Magnet Bracket
• 2. Cup Mount
• 3. Suction Cup Mount
• 4. Beanbag Mount
• 5. RVMB01 Mirror Mount

Camera Brackets:

• 1. Peaked Cap Bracket
• 2. VF01 bracket adapter Plate
• 3. B-F02 Furrion mount adapter Plate
• 4. CF100 Furrion Bracket Adapter Plate
• 5. Magnet Mount
• 6. U-Support Bracket
• 7. Side Camera Bracket
• 8. Metal Plate MP02
• 9. Metal Plate MP03
• 10. M3 Circle Magnet

Monitor Mounts

There are 5 types of Haloview backup camera mounts depending on the mounting position. Rotating magnet mount (dash), cup mount (cup holder), suction cup mount (windshield or dashboard), bean bag mount (dashboard) and RVMB01 mirror mount (rear view mirror).

1. Swivel Magnet Bracket

The swivel magnet mounting bracket is compatible with all Haloview 5" or 7" monitors. It consists of a metal plate base with 3M tape and a removable stand with two side magnets. The stand rotates 360 degrees for easy angle adjustment and is removable when you don't want to use it. This swivel magnet backup camera mounts is highly magnetic and ensures that the monitor is stable and will not fall off.

Suitable for: Haloview 5" or 7" monitors

2. Cup Mount

The cup mount can rotate 360°and is adjustable vertical and horizontal. Easy to install and easy to remove. Because mounting on the cup holder, the cup backup camera mounts does not block the view. Suitable for various cup holders and compatible with Haloview 5"/7" monitors.

Suitable for: Haloview 5" or 7" monitors

3. Suction Cup Mount

You can install your backup camera on the windshield with the suction cup monitor mount. The dashboard can serve as another mounting location using suction cup mounts and bean bag mounts. Easy to use and flexible adjustable angel. Two sizes of suction cups are available: 5'' and 7''. The 5'' suction cup for MC5101/MC5111 monitor; 7'' suction cup for MC7101, MC7102, MC7108, MC7601, MC7611, RD7 series and BT7 series display.

Suitable for: Haloview 5" or 7" monitors

4. Beanbag Mount

This beanbag mount has a weighted, non-slip base. No drilling is required. It sits securely on the dashboard without sliding or separating, even when moving. This backup camera mounts is portable, so it is removable when not in use. They would make a great mounting kit if used in conjunction with a suction cup mount.

Suitable for: Haloview 5" or 7" monitors

5. RVMB01 Mirror Mount

This mirror backup camera mounting bracket can mount the monitor on an existing rearview mirror, saving space on the dashboard and avoiding obstructing the view. Together with the rubber strap, the mirror mount holds the monitor securely to the mirror so that they all will not fall off, even when braking or suddenly decelerating. Easy to install. Screw the mirror holder to the back of the monitor, and then bind the rubber band to the monitor on the rearview mirror. That's all you need to do.

Suitable for: Haloview 5" or 7" monitors

Camera Brackets

1. Peaked Cap Bracket

The peaked cap backup camera bracket has a cover housing, providing shade and water resistance to the camera. In addition to the peaked cap bracket, there also comes with a round magnet, metal plate, bracket gasket, and power adapter. The round magnet and metal plate are convenient for non-drilling installation. The bracket gasket is to avoid leaving marks on your vehicle. As for the power adapter, it's to match with furrion pre-wiring RV. It has a Furrion compatible connector on one end and a haloview compatible connector on the other end. So there is no need to worry about compatibility. Any RV with Furrion pre-wiring can use it.

Compatible with CA616T/CA614/CA116/CA109 (MC5111/RD5 MINI/MC7109/MC7109 MAX/ MC7109P/MC7109 Plus/MC7109 Ultimate/MC7109R Ultimate/RD7 MINI/RD7P/RD7 MAX/ RD7 Plus/RD7 Ultimate/RD7R Ultimate/MC10/RD10) BT7 Series Camera

2. VF01 bracket adapter Plate

The VF01 backup camera bracket adapter plate with mounting holes matches the pre-wired backup camera bracket of the Voyager and Furrion cameras. It is suitable for all RVs with Furrion/Voyager pre-wiring.

Compatible with all Haloview backup cameras except the Handy camera, Night King camera and side marker light camera and red marker light camera. (except Handy 7/Handy 10/RD7R/RD7R Plus/MC7109R/MC7109R Plus)

3. B-F02 Furrion mount adapter Plate

The package includes a B-F02 Furrion mount adapter and Furrion power cord adapter. The B-F02 Furrion mount adapter screws onto the Furrion mount. You do not need to remove the Furrion mounting housing to install it. The power adapter has a Furrion-compatible connector on one end and a haloview-compatible connector on the other end. So there is no need to worry about compatibility issues. Any RV that has a Furrion pre-wired can use it.

Compatible with: CA616T/CA614/CA116/CA109/(MC5111/RD5 MINI/MC7109/MC7109 MAX/ MC7109P/MC7109 Plus/MC7109 Ultimate/MC7109R Ultimate/RD7 MINI/RD7P/RD7 MAX/ RD7 Plus/RD7 Ultimate/RD7R Ultimate/MC10/RD10) BT7 Series Camera

4. CF100 Furrion Bracket Adapter Plate

The package includes the CF100 Furrion bracket adapter plate and the furrion power adapter cable. Remove the furrion mounting cover and mount the bracket adapter plate directly on the shark fin rubber piece of the furrion. Align the CF100 backup camera bracket with the existing holes in the Furrion gasket and tighten it with self-tapping screws. It is not compatible with the new Furrion pre-wire and pre-bracket.

Compatible with: CA613T/CA612/CA611/CA601/CA108/CA101/CA109/CA616T/CA614/CA116 (MC7101/MC7611/MC7601/MC7108/RD7/MC5111/RD5 MINI/MC7109/MC7109 MAX/ MC7109P/MC7109 Plus/MC7109 Ultimate/MC7109R Ultimate/RD7 MINI/RD7P/RD7 MAX/ RD7 Plus/RD7 Ultimate/RD7R Ultimate/MC10/RD10) BT7 Series Camera

5. Magnet Mount

The magnet and backup camera can be fixed with screws and then mounted on the metal surface of your vehicle. No drilling is needed. Easy to install.

Compatible with CA613T/CA612/CA611/CA601/CA108/CA101(MC7101/MC7611/MC7601/ MC7108/RD7)

6. U-Support Bracket

The U-Support backup camera bracket can lengthen the distance between the camera and the mounting surface. Avoid the problem of the antenna topped. Suitable for box-type cameras.

Compatible with CA613T/CA612/CA611/CA601/CA108/CA101(MC7101/MC7611/MC7601/ MC7108/RD7)

7. Side Camera Bracket

Mainly used to fix the box backup camera to the side of the vehicle as a side camera. It can be mounted using screws.

Compatible with CA613T/CA612/CA611/CA601/CA108/CA101(MC7101/MC7611/MC7601 /MC7108/RD7)

8. Metal Plate MP02

The MP02 with adhesive easily sticks to the back or roof of aluminum RV or fiberglass RV. You can use it together with a magnet backup camera bracket for mounting the backup camera on a flat surface. If you use a box-style camera, such as CA613, you can use the metal plate with the U shape backup camera bracket to fix the backup camera.

Suitable for Handy Camera/Night King Camera/CA613T/CA612/CA611/CA601/CA108/CA101 (MC7101/MC7611/MC7601/MC7108/RD7/Handy 7/Handy 10) BT7 Series Camera

9. Metal Plate MP03

MP03 is more suitable for the convex surface than MP02 and sticks easily to the back or roof of aluminum RV or fiberglass RV. It is very fit for use with magnet holders. If you use box backup cameras, such as CA613 and CA108, you can use the metal plate with the U-bracket to hold the backup camera.

Handy Camera/Night King Camera/CA613T/CA612/CA611/CA601/CA108/CA101 (MC7101/MC7611/MC7601/MC7108/RD7/Handy 7/Handy 10) BT7 Series Camera

10. M3 Circle Magnet

M3 can use with metal plates to mount the backup camera without drilling. It is simple to install.

Suitable for CA116, CA616T.(MC5111/RD5 MINI/MC7109/MC7109 MAX/MC7109P/MC7109 Plus/ MC7109 Ultimate/MC7109R Ultimate/RD7 MINI/RD7P/RD7 MAX/RD7 Plus/RD7 Ultimate/RD7R Ultimate/Handy 7/Handy 10/MC10/RD10) BT7 Series Camera