Notice: Dear customers, due to the upcoming Spring Festival, the shipment of this product is expected to be suspended on Jan 21st, please place your order ASAP.
NOT Compatible with 720P wireless monitors. Supports installation on vehicles up to 65ft
1080P Video Recording Resolution: Seamless recording events with 1080P@30fps FHD Resolution Lens
Low Latency: New-gen wireless technology ensures less lag & interference-free signal
Compatible With Multi Vehicles: Supports installation on vehicles up to 65ft
Full-Color Dim-Light Night Vision: Powerful image sensors delivers full color image even in dim-light conditions
Night Vision Fill Lights: It can be activated/deactivated remotely by the monitor if the ambient light is extremely low
Note: We don't recommend you connect the trigger wire if you use the camera for long-hour observation.
Do you mean like this one? https://www.haloview.com/haloview-ca110-wireless-720p-high-definition-side-camera-for-mc7108-mc5111.html
By Haloview Team on
01 April, 2024
I only have two wires on my existing marker light(s). Obviously positive and negative. Do I need to use the white grounding wire or should I simply clip it? I want my marker lights on anytime the marker power is applied. I do NOT want them to be triggered by a turn signal, for example. Thoughts?
If you do not want to use the trigger function, pls do not connect the green trigger wire.
By Haloview Team on
02 February, 2024
I am trying to install the BT 129 side marker lights/cameras. I was able to figure out how to enable the camera. It works well when I turn on my marker light power. However, I cannot get the marker lights on the BT129 to activate nor do I know how to temporarily activate the camera's light (like when I need it lit at night after we're stopped). I tried every wiring config but cannot find the right combination. Is this something to do with wiring or is it a software switch on the main display?
Please check whether your wiring is intact. The power wire of the camera and the marker light have labels 12V and GND. You need to splice them respectively and connect them to the corresponding positive and negative wires on the RV.
By Haloview Team on
02 February, 2024
what is the total height of the Haloview BTC129 Byte Tango Side Marker Light Cameras for RVs. I looked at the .jpg file but it does not show the height of the camera