Haloview SENS 3 Pro Wireless ADAS System for Blind Spot Detection
$999.00
In stock
Details
Haloview SENS 3 is the World-First wireless advanced driving assistance system (ADAS) for blind spot detection, it is perfect for Trucks, Buses, Trailers, Campers, RVs, Vans, SUVs, or small vehicles! This system is composed of two microwave radar sensors, left and right alarm light buzzers, and a radar control box. When the radar detects a vehicle driving in an adjacent lane approaching the rear of the driver's vehicle - a common blind spot area, it actively notifies the driver with an indicator.
Blind Spot Detection (BSD)
SENS 3 Blind Spot Detection System is designed to assist in detecting vehicles entering your vehicle’s blind spot zone around the rear of your vehicle and in the lanes on the left and right with an approximate range of up to 70 meters. The system functions as an aid for notifying the driver if a vehicle has entered or is present in the blind spot area.
Lane Change Assist (LCA)
This type of detection will notify the driver if a vehicle, fast-approaching vehicles from behind (TTC collision pre-warning time: 3.5 seconds, changing lane is dangerous), is in the BSD detection area. If a vehicle has entered the BSD detection area the LED indicator will illuminate and the buzzer will sound to warn the driver that a vehicle is present.
Active Overtaking Alarm (AOA)
This type of detection will notify the driver if a vehicle is in the BSD detection area while passing another vehicle. When the target vehicle enters the BSD detection area, the LED indicator will illuminate and the buzzer will sound to warn the driver that a vehicle is present.
* This product functions as an aid for notifying the presence of obstacles in vehicle blind spots. It does not detect all dangers and obstacles and is not a substitute for your judgment and careful attention. Before any maneuver, visually check both sides of the vehicle to confirm.
Features
SENS 3 is an extra pair of eyes to help keep you & your loved ones safe while on the road. It is equipped with interior LED indicators for audio and visual alerts that are activated by the BSD, LCA & AOA features which senses vehicles approaching or overtaking your vehicle from the rear, or when your vehicle is approaching or overtaking moving vehicles.
- No need to use the OBD port in the car, the driver's speed is measured by the GPS module in the control box, and under the combined action of high accuracy radars, false alarms can be reduced significantly.
- The speed per hour of starting the alarm signal can be set, there are 00MPH/06PMH/17MPH/37MPH/56MPH settable.
- The control box is powered by an overcharge and over-discharge protection built-in lithium battery with 26h life, which can be charged by cigarette lighter or power bank.
- The radar sensor transmits data to control box wirelessly up to 65ft.
- The SENS 3 can sense the driving data of surrounding vehicles during driving, identify, track and calculate static and dynamic objects, so as to allow the driver to be informed of possible dangers in advance, which effectively increase the safety of driving.
- It has self-optimization capability to optimize its data computing. The system will be more accurate over 1000KM running.
2 Separatedly LED Indicator--Adjustable Audio&Visual Alert
The brightness and volume of Audio&Visual Alert are adjustable, which make it easier to be aware of blind spot as you are driving.
ECO Mode
Radar sensors enter into low power consumption once radar control box is turned off. Radar sensors will be awake once radar control box is turned on again.
Considerate Toolkit
Everything you need comes in the box. We provide all tools for installation.
Upgrade your driving safety without high installation cost or tons of time. It’s a hands-on ADAS kit which makes installation extremely simple.
The installation of traditional wired ADAS systems is extremely complicated, requiring professionals to remove the bumper of the car for installation, while our wireless ADAS system can achieve a more concise installation with the smart battery pack.
Traditional wired ADAS systems installation video:
How to install SENS 3
Drill Holes Installation Method:
You need to drill holes in the back of your RV, take apart the tail light cover to get power for the radar.
No Drill/Screw Mounting Option:
We offer batteries in the SENS 3 Plus and SENS 3 Plus, easy to mount on any vehicles, No Drill or Screw, just Plug and Play.
Easy Installation
Easy to mount on the trailer exterior, compatible with nearly all type of trailer including 5th wheel. The radar alarm signal is transmitted to the radar control box wirelessly, which can be installed without wiring.
Portable
The radar sensors of SENS 3 are completely wire free and features a magnetic base, it’s easy to move from one vehicle to another, we also offer a portable box which makes storage simple.
Battery
Two Smart Battery Packs are provided in the SENS 3 Plus, which allows your Radar Sensor running for up to 4 hours on a single charge. The SENS 3 Pro contains 4 Smart Battery Packs for the radars, charged batteries get 8 hours of battery life!
Compatibility
It’s an aftermarket blind spot detection system that compatible with all makes and models of RVs. It’s easy to mount on RV exteriror. All parts are available for replacement if damaged. It helps to ease the worries and stress associated with driving motorhomes and towables.
Durability
The SENS 3's radars are built to last in any weather and any time of year, IP69 Water resistance keeps itself safe during rain, stormy weather. (Please note that in severe weather such as heavy rain, the detection range may decrease.)
What's in the box
- Radar Control Box x 1
- Radar Sensor x 2
- LED Indicator x 2
- DC Extension Cable x 2
- Antenna x 2
- 3M Tape x 4
- Installation Angle Tool x 1
- Cigarette Lighter x 1
- Smart Battery Pack x 4
Specification
Radar Sensor
| Radar | |
| Modulation | FMCW |
| Radar Distance | 0.5 ~ 70m |
| Range | |
| Distance(Vehicle) | ≤70m |
| Distance(Pedestrian) | ≤15m |
| Accuracy | 0.3m |
| Unit | |
| Operating voltage | TX: 12V 360mA |
| Operating temperature | -20°C ~ +70°C |
| Storage temperature | -30°C ~ +80°C |
Radar Control Box
| OLED | 1.3 Inch |
| Resolution | 128x64 pixels |
| Battery capacity | 12.6 wh |
| Charging time | 6H |
| Discharging time | 26H |
| Operating voltage | 5V@1A (includes battery charging current) |
| Operating temperature | Charge: 0°C ~ 45°C Discharge: -10°C ~ 60°C |
| Storage temperature | -30°C ~ 70°C |
Video
Reviews 19
Write Your Own Review
Download
Q&A
You state batteries are good for 26 hrs continuous use. What kind of battery is in the control box?
(
(
By Kurt on
27 July, 2022
-
The batter is Smart Battery Pack, product link: https://www.haloview.com/haloview-smart-battery-pack.htmlBy Haloview Team on29 July, 2022
-
These sensors must be installed 20-31 inches above the ground, and make sure the angle between the sensor and the rear wheel is 50 degrees.By Haloview Team on16 February, 2022
Does it need a steady source of power? I prefer a permanent installation.
By Dustin Latham on
25 January, 2022
-
Yes, it would need a steady power source.By Haloview Team on26 January, 2022
-
Sure.By Haloview Team on18 January, 2022
SKU
SENS 3 Pro
Category
Fast Shipping
Money Back Guarantee
